Electrostatic eliminator, ion rod, ion air rod, electrostatic elimination equipment, electrostatic elimination device, high-voltage generator, high-voltage power supply, electrostatic adsorption, ion fan, ion air nozzle, electrostatic rope, ion air gun, human electrostatic discharge device.
Jinxida Electrostatic Technology (Shanghai) Co., Ltd. is an enterprise that integrates sales and technical services. Provide products and solutions such as electrostatic eliminator, ion wind rod, ion rod, high-voltage generator, electrostatic rope, electrostatic eliminator brush, electrostatic adsorption, ion fan, Electrostatic precipitator, sensor, electrostatic testing instrument, human body electrostatic eliminator, etc. The products are widely used in plastic film, textile, printing, painting, new energy, soft packaging, cigarette packaging factories, papermaking, electronics, semiconductors, automation equipment, petrochemical and other industries. Electrostatic eliminator | film electrostatic eliminator | spray painting electrostatic eliminator | printing electrostatic eliminator | coating machine electrostatic eliminator | slitting machine electrostatic eliminator
The company always adheres to the corporate spirit of "integrity is gold, service is attentive", and adheres to the concept of "integrity, focus, quality, and responsibility"; The purpose of creating value through service and achieving mutual benefit and win-win cooperation; Provide customers with more advantageous electrostatic solutions and products.
JXD-EX10 Intelligent Pulse Ion Air Rod
1、 Product features:
1. Adopting advanced HDC-AC technology to provide stable and long-term electrostatic elimination capabilities.
2. Improve static electricity elimination performance by 30%.
3. The ability to eliminate static electricity can maintain long-term stability.
4. Reduce the wear of emitted ions.
5. Excellent ion balance performance.
6. Low ozone.
7. Clean the timing function.
8. High safety performance.
9. The ion needle holder is easy to replace.
2、 Product performance parameters:
Model JXD-EX10
Input voltage DC24V ± 5%
Input current ≤ 0.1A
Product power ≤ 2.4W
Working voltage pulse AC mode/± 7000V
Electrode needle tungsten steel needle
Static electricity removal time 1.0s (measurement distance 300mm, supply pressure 0.3 MPa)
Installation distance 100mm-1000mm
Working pressure 0.01-0.5Mpa
Ion balance within ± 20V (measurement distance 50mm, supply pressure 0.3 MPa)
Working environment temperature 0 ℃ -40 ℃
Working environment humidity 15-75% RH (no condensation)
Ozone generation below 0.03ppm (measurement distance 50mm, supply pressure 0.2 MPa)
Input interface POE network socket power supply port
The cleaning timer is set within the range of 0-999 hours
The LED indicates that the indicator light is on when the H. V green high voltage is operating normally
The indicator light lights up when the alarm red discharge circuit is abnormal (overcurrent)
CLEANING yellow reaches the set time of the cleaning timer, and there is a buzzer to remind you
Product material: PVC composite material+aluminum profile
External dimensions L * W * H (200-1500) * 36 * 70mm
1 year warranty
3、 Operating instructions:
1. Install and fix the ion air bar.
2. Connect the air source to the ion air bar and adjust the air pressure.
3. Connect the power adapter, the POWER indicator light is on, and the RUN indicator light for normal operation of the ion air bar is on.
4. Adjust the cleaning timer for cleaning time. Set cleaning time, with 9 modes, 100-1000 hours, and no cleaning settings.
When the running time of the ion air bar exceeds the cleaning time setting, the yellow light will light up. Press the reset switch to turn off the yellow light.
When the high-voltage main body experiences abnormal discharge or the circuit experiences current surge, the red light will light up. Turn off the high-voltage discharge power supply of the ion air bar.
4、 Wiring instructions:
1.1 foot optocoupler collector.
2.2 foot optocoupler emitter.
3.3 Foot empty.
4.4 Pin 5 power supply 24V.
5.6 Foot clearance.
6.7 Pin 8 power supply 0V.
5、 Precautions:
1. The equipment has undergone rigorous testing, inspection, and aging treatment before leaving the factory, and its performance fully meets the relevant indicators indicated in the user manual
2. The entire equipment must be reliably grounded during use, otherwise it may cause the rod body to burn out.
3. It is strictly prohibited to touch the electrode needle during the operation of the ion air bar.
4. It is not suitable to use this device in an environment with a humidity greater than 70%.
5. The air source connected to the ion air bar must be clean air filtered with water, grease, and fine dust.
6. It is strictly prohibited to use this equipment in flammable and explosive environments.
7. Internal maintenance and repairs must be carried out by professional personnel.
Application field:
Our company also has various electrostatic product models in various industries such as electronics, optoelectronics, new energy, plastics, film, printing, coating, slitting, textile, papermaking, etc.: JXD-EB01, JXD-EX08, JXD-EX09, JXD-EX10, JXD-EV10, JXD-EV20, JXD-EV30, JXD-EF90, JXD-EF30, JXD-HV-01, JXD-HV-02, JXD-HV-04, JXD-HV-71, JXD-HV-72, JXD-HV-74, JXD-S03, JXD-S05, JXD-NF08, JXD D-NF09, JXD-NF10, JXD-NF11, JXD-NF12, JXD-NF13, JXD-NF14,
Lithium separator coating machine ion air rod, lithium separator cutting machine ion air rod, optical film cutting machine ion air rod, exposure machine ion air rod, chip manufacturing production line electrostatic ion air rod, electronic factory assembly line ion air rod, electronic product production line ion air rod, lens cleaning machine ion air rod, cleaning machine ion air rod, crystal solidification machine ion air rod, plate splitting machine electrostatic ion air rod, plate splitting machine dust removal and electrostatic equipment, Disk feeding vibrator for removing static ion air bar, crystal oscillator production line for removing static electron ion air bar, injection molded parts for removing static ion air bar, PCB circuit board for dust removal and removing static ion air bar, LED light strip for testing packaging for removing static ion air bar, SMT laser coding machine for removing static ion air bar, SMT laser coding machine for removing static electricity, laser coding machine for static electricity eliminator
